Salicru UPS SPS 1100 ONE BL IEC (1100VA/600W, Tower, 6×C13, Line interactive)

This Salicru SPS 1100 ONE BL IEC uninterruptible power supply is designed to ensure stable electricity supply and protect sensitive electronics from voltage fluctuations and outages. With 1100VA / 600W power and Line-interactive technology, this tower-type device is ideal for home or office environments. It effectively stabilizes voltage and provides backup power, allowing connected devices to be safely shut down in the event of power disruptions.

Product information

General information

• Model code: 662AG000011
• Power (VA/W): 1100 / 600
• Dimensions (D × W × H mm): 320 × 130 × 182
• Weight (Kg): 8.2
• Technology: Line-interactive
• Format: Tower
• Housing: Plastic

Input parameters

• Input voltage: 220 V / 230 V / 240 V AC
• Voltage range: Up to 162 V ÷ 290 V
• Stabilizer: AVR Buck / Boost
• Nominal frequency: 50 / 60 Hz
• Automatic frequency detection: Yes
• Protection: Thermal reset or fuse (depending on model)

Output parameters

• Output voltage: 220 V / 230 V / 240 V AC
• Output sockets: 6 × IEC
• Voltage accuracy (battery mode): ±10%
• Waveform (battery mode): Simulated sine wave
• Frequency: 50 / 60 Hz ± 1 Hz
• Transfer time: 2 / 6 ms

Battery

• Batteries: 2×12V/7Ah
• Battery type: Sealed Pb-Ca, maintenance-free, estimated lifespan 3-5 years
• Charging time: 4-6 hours to 90% capacity
• User replaceable battery: Yes
• Backup runtime: Up to 20 minutes
• Battery replacement signal: Yes

Communication and control

• Communication ports: USB HID
• Monitoring software: Compatible with Windows, Linux, Unix and Mac (downloadable from support.salicru.com)

Indication and alarms

• Indications: LED status indicators
• Operating modes: Normal / Stabilization (AVR) / Battery mode
• Mains voltage available: Green LED
• Alarm indications: Output battery mode, low battery, charger fault and overload
• Audible alarms: Every 10 s in battery mode, every 1 s when battery is low, every 0.5 s for overload, continuous in case of fault, 2 s for battery replacement
• Fault indicator: Red LED
• Cold start (start from battery): Yes
• Automatic restart: Yes, after backup runtime expires

Operating conditions and standards

• Operating conditions (temperature): 0º C ÷ +40º C
• Relative humidity: Up to 90%, non-condensing
• Maximum operating altitude: 2 400 m above sea level
• Acoustic noise at 1m distance: < 40 dB
• Standards: Safety: EN IEC 62040-1, EMC: EN IEC 62040-2, Performance: EN IEC 62040-3
• Certificates: ISO 9001, ISO 14001, ISO 45001

Downloads / certificates

📄CE declaration

📄User manual

📄Specification