ARCTIC P8 PWM PST CO case fan, 4-pin, 80mm, black

P8 PWM PST CO (for continuous operation) case fan, 4-pin, 80mm, black.


Features:
Designed for continuous operation. The high-quality Japanese-made dual ball bearing allows for uninterrupted 24/7 operation without compromising performance. Contamination and high temperatures affect this bearing much less than conventional sleeve or ball bearings. It is an excellent choice if you want to ensure continuous operation at maximum speed.
PWM PST technology allows connecting multiple fans (up to 5 recommended), synchronizing their operating speed according to the actual cooling needs of the computer. This way, the entire cooling system operates more efficiently and quietly, and the overall energy consumption is lower than when connecting each fan/cooler separately.
Maximum quietness, minimal vibration. Even at low speeds, the operating sound of the new ARCTIC motor is barely noticeable. Thanks to sinusoidal magnetization, the new motor is very smooth and almost vibration-free – it generates only about 5% of the vibration level produced by a conventional unfiltered DC motor. As a result, fans do not require anti-vibration pads.
Optimized for static pressure. In the design of the new P8 PWM PST CO fan, special attention was paid to concentrated airflow and static pressure. This fan guarantees exceptionally efficient cooling, even with increased air resistance.
Longer service life. A 10°C lower motor temperature approximately doubles the fan's service life. The new ARCTIC motor has a four times longer service life due to its low coil temperature. Therefore, a 6-year manufacturer's warranty is provided.
Speed adjustable via PWM PST. Thanks to the 4-pin connector, the rotational speed can be adjusted over a wide range via PWM from 200 to 3000 RPM. This minimizes noise while ensuring maximum cooling when needed.
Two operating modes. Expelling warm air from the case. Blowing cold air into the case.


Technical data:
Speed: 200-3000 RPM.
Airflow: 23.4 CFM / 39.76 m³/h.
Static pressure: 1.9 (mm / H2O).
Noise level: 0.3 sone.
Bearing: Dual ball bearing.
Voltage / current: 12V DC / 0.09A.
Starting voltage: 3.4 V.
Connector: 4-pin + 4-pin socket.
Cable length: 400 mm.
Dimensions: 80x80x25 mm.
Weight: 78.5 g.


Warranty: 6 years.