Current leakage relay with automatic circuit breaker legrand 411162 (C, 40A, 2P, 30mA, 230V)

Description

The Legrand 411162 is a residual current circuit breaker with overcurrent protection (RCBO), suitable for use in low voltage electrical networks. It is a 2-pole device with a Type C characteristic, designed to protect electrical circuits from overcurrents and residual currents. Its rated current is 40 A, and its sensitivity is 30 mA, ensuring fast disconnection in case of danger. This model meets the requirements for low voltage installations, and its 10 kA breaking capacity guarantees reliable circuit protection in the event of a short circuit.

Specification

• Rated current: 40 A
• Number of poles: 2
• Rated voltage: 230 V AC
• Rated residual current (Sensitivity): 30 mA
• Breaking capacity: 10 kA (according to IEC 60947-2)
• Tripping characteristic: C
• Residual current type: AC
• Frequency: 50 Hz
• Number of protected poles: 2
• Simultaneously switched neutral conductor: Yes
• With interlocking device: Yes
• Pollution degree: 2
• IP rating: IP20
• Width in number of modular spacings: 4 modules
• Built-in depth: 44 mm
• Flush mounting: Yes
• Connectable conductor cross-section (single wire): 1-35 mm²
• Connectable conductor cross-section (multi-wire): 1-25 mm²

Manufacturer

🔗 Manufacturer link

Documents / Certificates

🔗 Datasheet

Frequently Asked Questions (FAQ)

What is a Type C characteristic circuit breaker used for?

Type C characteristic circuit breakers are designed for protection in circuits with inductive loads and higher inrush currents, such as motors or transformers.

What does a 30 mA sensitivity mean?

A 30 mA sensitivity means that the device will disconnect the electrical circuit if the residual current reaches or exceeds 30 milliamperes. This is a standard sensitivity for protection against electric shock.

What is the mounting depth of this device?

The built-in depth of this model is 44 mm, suitable for standard DIN systems.