Salicru UPS SPS 700 ONE BL IEC (700VA/360W, tower, 4×C13, line interactive)

This Salicru SPS 700 ONE BL IEC Uninterruptible Power Supply (UPS) is designed to reliably protect sensitive electronics from power grid fluctuations and outages. It ensures a stable power supply with 700 VA / 360 W power and operates based on Line interactive technology. Due to its Tower format and four IEC output sockets, this device is an excellent choice for protecting office or home computer equipment.

Product Information

Key Features

• Model Code: 662AG000005
• Power (VA/W): 700 / 360
• Output Sockets: 4 × IEC
• Dimensions (D × W × H mm): 300 × 101 × 142
• Weight (kg): 4.5
• Technology: Line-interactive
• Format: Tower
• Housing: Plastic

Input Characteristics

• Input Voltage: 220 V / 230 V / 240 V AC
• Voltage Range: From 162 V to 290 V
• Stabilizer: AVR Buck / Boost
• Nominal Frequency: 50 / 60 Hz
• Automatic Frequency Detection: Yes
• Protection: Thermal protection or fuse (depending on the model)

Output Characteristics

• Output Voltage: 220 V / 230 V / 240 V AC
• Voltage Accuracy (battery mode): ±10%
• Waveform (battery mode): Modified sine wave
• Frequency: 50 / 60 Hz ± 1 Hz
• Transfer Time: 2 / 6 ms

Battery and Runtime

• Battery Type: Sealed Pb-Ca, maintenance-free, estimated service life 3-5 years
• Battery Configuration: 1×12V/7Ah
• Charging Time: 4-6 hours to 90% capacity
• User-Replaceable Battery: Yes
• Backup Runtime: Up to 20 minutes
• Battery Replacement Signal: Yes

Connectivity and Management

• Communication Ports: USB HID
• Monitoring Software: Compatible with Windows, Linux, Unix, and Mac (downloadable from support.salicru.com)

Indications and Alarms

• Indications: LED status indicators
• Operating Modes: Normal / Stabilization (AVR) / Battery
• Mains Voltage Present: Green LED
• Alarm Indications: Operating in battery mode, low battery, charger failure, and overload
• Audible Alarms: Every 10 seconds when operating on battery, every 1 second for low battery, every 0.5 seconds for overload, continuous for failure, 2 seconds for battery replacement
• Fault Indicator: Red LED

Additional Features

• Cold Start (start from battery): Yes
• Automatic Restart: Yes, after backup runtime expires

Operating Conditions

• Operating Conditions (temperature): 0º C ÷ +40º C
• Relative Humidity: Up to 90%, non-condensing
• Maximum Operating Altitude: 2,400 m above sea level
• Acoustic Noise at 1m distance: < 40 dB

Standards and Certifications

• Standards: Safety: EN IEC 62040-1, EMC: EN IEC 62040-2, Performance: EN IEC 62040-3
• Certifications: ISO 9001, ISO 14001, ISO 45001

---

Downloads / Certifications

📄CE Declaration

📄User Manual

📄Datasheet