Salicru UPS SPS 1500 ONE BL IEC (1500VA/900W, Tower, 6×C13, Line interactive)

This Salicru SPS 1500 ONE BL IEC line-interactive uninterruptible power supply (UPS) is designed to reliably protect electronic equipment from voltage fluctuations and power outages. The device, featuring a 1500VA/900W capacity, ensures stable power delivery with its tower form factor, ideal for office or home environments. It includes six IEC C13 output sockets, allowing connection of multiple devices, and an integrated automatic voltage regulator (AVR) to guarantee smooth operation.

Product Information

General Specifications

• Model Code: 662AG000014
• Power (VA/W): 1500 / 900
• Technology: Line-interactive (simulated sine wave)
• Form Factor: Tower
• Dimensions (D × W × H): 320 × 130 × 182 mm
• Weight: 10.4 kg
• Housing: Plastic

Input

• Input Voltage: 220 V / 230 V / 240 V AC
• Voltage Range: 162 V to 290 V
• Stabilizer: AVR Buck / Boost
• Nominal Frequency: 50 / 60 Hz
• Automatic Frequency Detection: Yes
• Protection: Thermal reset or fuse

Output

• Output Voltage: 220 V / 230 V / 240 V AC
• Output Sockets: 6 × IEC C13
• Voltage Accuracy (battery mode): ±10%
• Waveform (battery mode): Simulated sine wave
• Frequency: 50 / 60 Hz ± 1 Hz
• Transfer Time: 2 / 6 ms

Battery

• Battery Type: Sealed Pb-Ca, maintenance-free, estimated service life 3-5 years
• Recharge Time: 4-6 hours to 90% capacity
• User-Replaceable Battery: Yes
• Backup Runtime: Up to 20 minutes
• Battery Replacement Signal: Yes
• Batteries: 2×12V/9Ah

Communication and Management

• Communication Ports: USB HID
• Monitoring Software: Compatible with Windows, Linux, Unix, and Mac (downloadable from support.salicru.com)
• Cold Start (from battery): Yes
• Automatic Restart: Yes, after backup power runtime expires

Indicators and Alarms

• Indicators: LED status indicators
• Operating Modes: Normal / Stabilization (AVR) / Battery
• Mains Voltage Available: Green LED
• Alarm Indications: Output in battery mode, low battery, charger fault, and overload
• Audible Alarms: Every 10 s when operating on battery, every 1 s for low battery, every 0.5 s for overload, continuous for fault, 2 s for battery replacement
• Fault Indicator: Red LED
• Display: LED

Environmental Conditions

• Operating Conditions (temperature): 0º C to +40º C
• Relative Humidity: Up to 90%, non-condensing
• Maximum Operating Altitude: 2,400 MASL
• Acoustic Noise at 1m: < 40 dB

Standards and Certifications

• Standards: Safety: EN IEC 62040-1, EMC: EN IEC 62040-2, Performance: EN IEC 62040-3
• Certifications: ISO 9001, ISO 14001, ISO 45001

Downloads / Certifications

📄CE Declaration

📄User Manual

📄Datasheet