ARCTIC P8 PWM PST CO Case Fan, 4-pin, 80mm, Black

PC Case Fan P8 PWM PST CO (for continuous operation), 4-pin, 80mm, black.


Features:
Designed for Continuous Operation. The high-quality, Japanese-made dual ball bearing enables uninterrupted 24/7 operation without compromising performance. Contamination and high temperatures affect this bearing much less than conventional sleeve or single ball bearings. It is an excellent choice if you want to ensure continuous operation at maximum speed.
PWM PST technology allows connecting multiple fans (up to 5 recommended), synchronizing their operating speed based on the actual cooling needs of the computer. This way, the entire cooling system operates more efficiently and quietly, and the overall power consumption is lower than connecting each fan/cooler separately.
Maximum Quietness, Minimum Vibration. Even at low speeds, the operating sound of the new ARCTIC motor is barely noticeable. Thanks to sinusoidal magnetization, the new motor is very smooth and almost vibration-free – it generates only about 5% of the vibration level produced by a conventional unfiltered DC motor. As a result, fans do not require anti-vibration pads.
Optimized for Static Pressure. During the development of the new P8 PWM PST CO fan, special attention was paid to a focused airflow and static pressure. This fan guarantees highly effective cooling, even with increased air resistance.
Extended Service Life. A 10°C lower motor temperature approximately doubles the fan's service life. The new ARCTIC motor's service life is four times longer due to low coil temperature. Therefore, a 6-year manufacturer's warranty is provided.
Speed Adjustable via PWM PST. Thanks to the 4-pin connector, the rotational speed can be adjusted across a wide range via PWM from 200 to 3000 RPM. This minimizes noise and ensures maximum cooling when needed.
Two Operating Modes. Expelling warm air from the case. Blowing cold air into the case.


Technical Specifications:
Speed: 200-3000 RPM.
Airflow: 23.4 CFM / 39.76 m³/h.
Static Pressure: 1.9 (mm / H2O).
Noise Level: 0.3 sone.
Bearing: Dual Ball Bearing.
Voltage / Current: 12V DC / 0.09A.
Start-up Voltage: 3.4 V.
Connector: 4-pin + 4-pin socket.
Cable Length: 400 mm.
Dimensions: 80x80x25 mm.
Weight: 78.5 g.


Warranty: 6 years.